15.9.19 (1080i letter and split)
V-S, V-Size adjustment

TOP PREVIOUS NEXT

PREPARATION

1. Apply a 1080i pattern

2. Normalize the picture settings.

3. Set picture mode to VIVID

PROCEDURE

1. Enter to service mode

2. Adjust “VAMP” so that width C and D becomes 60mm

3. Check a and b sizes, If b-a < -1.5mm (in top and bottom extending case)

   • Increase “V-S” DATA by one step

   • Adjust “VEAMP” so that width C and D becomes 60mm.

     NOTE

     Repeat until b-a ± 1.5mm

4. Check a and b sizes, If b-a > -1.5mm (in top and bottom extending case)

   • Decrease “V-S” DATA by one step

   • Adjust “VEAMP” so that width C and D becomes 60mm.

     NOTE

     Repeat until b-a ± 1.5mm

     

TOP PREVIOUS NEXT