15.9.3 (480i/480p)
V-S, V-Size adjustment

TOP PREVIOUS NEXT

PREPARATION

1. Apply a crosshatch pattern

2. Normalize the picture settings.

3. Set picture mode to VIVID

PROCEDURE

1. Enter to service mode

2. Check a and b sizes, If b-a < -1.5mm (in top & bottom extending case)

   • Increase “V-S” DATA by one step

   • Adjust “VEAMP” so that V-SIZE is regular size again.

     NOTE

     Repeat “a” and “b” until b-a ± 1.5mm

3. Confirm to make outermost circle of monoscope pattern a correct circle

   V-Adjustment

   

TOP PREVIOUS NEXT