16.9.2 (480i/480p)
Vertical linearity(V-C), V-Size and V-Position adjustment

TOP PREVIOUS NEXT

PREPARATION

1. Apply a crosshatch pattern

2. Normalize the picture settings.

3. Set picture mode to VIVID

PROCEDURE

1. Enter service mode, select DAC adjustment
   “V-RAS” and adjust crosshatch pattern to center vertical position to the CRT center.

2. Adjust linearity data “V-C” so that interval of “a” is same as “b” (a=b).

   

3. If the v-position is not at the CRT center, adjust
   V position “V RAS” DATA again.

4. Adjust H-TRAPEZOID data “HTRAP” so that the upper and lower lines becomes horizontal.

TOP PREVIOUS NEXT