10 EEPROM copy jig

TOP PREVIOUS NEXT

This CTV has a feature that allows to clone or back-up main EEPROM data adjustments from a CTV to other by connecting a jig to the CTV set. A jig part number TXFJIG01SER, is available through Matsushita/Panasonic Services.

Preparation:

To connect this jig, remove the lower back cover as instructed on disassembly for service section on this service manual and insert the jig into A15 connector located on the A-Board by the RF splitter. (See figure)

EEPROM copy jig connection

Procedure to copy data:

  1. Enter to service mode and display service menu.

  2. Select “AREA” DAC and then press ACTION button on remote to enter. Press VOL right/left to select one of the following options then press ACTION:

    • Select ALL to copy all main EEPROM data

    • Select ADJ to copy only adjustment data.

    • Select FIX to copy only fix data

  3. To copy data from main EEPROM to jig, select “IN→EX” DAC and press ACTION button on remote.

  4. To copy data from jig to main EEPROM, select “EX→IN” DAC and press ACTION button on remote.


TOP PREVIOUS NEXT