4QD-TEC
Circuits Archive

4QD-TEC: Electronics Circuits Reference Archive
Audio: speaker powered
Peak Program Indicator

This circuit requires no battery, being powered from the loudspeaker signal
it is detecting. When the voltage being delivered to the speaker exceeds the
level set up by the preset RV, the LED indicator flashes.

The trigger level is adjustable from Vx to where so with the values shown detected voltage is 6v minimum,
27v max, eqivalent to a power (into an 8 ohm speaker) of 4.5w minimum, 72 watts
maximum.

Page Information
© 2011 4QD-TEC
Page's Author: Richard Torrens

Site hosted by Arachsys